|
Ceramic Cross Partition Rings
Technical Data Sheet
|
This product has excellent acid and heat resistance. It can standup to corrosion of various inorganic acids, organic acids and organic solvents except HF. It can be used in high or low temperature. Application ranges wide. It can be used in drying, absorbing,cooling and regenerating tower in chemical, metallurgic, coal gas and sir separation industry, etc. |
| & Typical chemical composition |
| SiO2 |
68-72 |
MgO |
0.6 |
| Al2O3 |
18-22 |
CaO |
0.6 |
| Fe2O3 |
Max. 1 |
K2O |
3.5-4.5 |
| |
|
Na2O |
0.1-0.3 |
| Soluble Fe: <0.01% |
| Acid resistance: 99.5%(DIN51102 sheet 2) | |
| & Typical physical properties |
| Density |
g/cm³ |
2.3-2.4 |
| Water Absorption |
% |
0-0.5 |
| Compressive Strength |
N /mm² |
300-500 |
| E-Modulus |
GPa |
60 |
| Mohs Hardness |
Scale |
7-8 |
| Specific heat, 20℃-100℃ |
J/kgK |
840-920 |
| Thermal Conductivity 30℃-100℃ |
W/mK |
1-1.5 |
| Coefficient of thermal expension |
(20℃-600℃)10-6K-1 |
4.7 |
| Heat Resistance |
Up to ℃ |
1000 | |
| & Specific properties of Ceramic Cross Partition Rings |
| Size |
Packing density
(kg/m³) |
Spec.surface
(m²/m³) |
Void space
(%) |
Numbers per m³ |
Ø50
50*50*5 |
740 |
160 |
50 |
5280 |
Ø80
80*80*8 |
1120 |
130 |
56 |
1950 |
Ø100
100*100*10 |
1100 |
105 |
53 |
1000 |
Ø120
120*120*12 |
1040 |
90 |
55 |
580 |
Ø150
150*150*15 |
1036 |
72 |
58 |
296 | |
| Ceramic Cross Partition Rings Testing Rule |
1.Fragmentation
Disqualification if more than 30% of the rings in a batch were broken; Disqualification if more than two places of a ring were broken.
2.Interstice
Disqualification if the interstice was wider than 0.8mm; Disqualification if there’s more than two interstices in a ring.
3. Chromatism
Disqualification if there’s more than 50% of rings in a batch had chromatism or smutch.
4. Felt
Disqualification if the rings felt together; Numbers of rings felt together should not above 0.5% of the package.
5. All the disqualified rings should not above 10% of the package.
6.Eyewinker, shiver and dust should not above 1% of the package.
7. Size
Length + width + height should be in the standard area, thickness also should be in the standard area, either of the above mentioned two items exceed the standard area should not above 20%
|
| |
